Inspection Steps
1. Preparation before experiment
Take out the reagent kit and sample to be tested, and return all reagents and samples to room temperature.
2. Experimental Steps
① Open the test reagent package, take out the test card and lay it flat.
② Add 10μL samples to the sample hole of the test card. Then add 2 drops (about 60μL) Sample buffer.
③ Reaction at room temperature for 10-15 minutes to observe the results, the results displayed after 20 minutes are invalid.
④ Concise operating procedures
Open the package, take out the test paper, and place it horizontally
↓
Add 10μL of the sample to the sample hole of the test strip
↓
Add 2 drops (about 60μL) of sample buffer to the sample hole
↓React at room temperature for 10-15 minutes
Read the results with the naked eye
Detailed explanation of test results
Negative,Positive,Invalid
Diagram of the test results :
① Invalid result: there is no visible red line or only the test line (T line) but no quality control line (C line), the test is invalid and the experiment should be repeated.
② Negative result: a red quality control line (line C), indicating that there is no antibody in the sample or the antibody is below the detection level.
③ Positive result: two red lines (one red quality control line and one of the red test lines) or three red lines (one red quality control line and two red test lines).